Update install and revert scripts for lid switch config

hypr/hyprland.conf

@@ -19,5 +19,10 @@ source = ~/.config/hypr/bindings.conf
 source = ~/.config/hypr/looknfeel.conf
 source = ~/.config/hypr/autostart.conf
 
+# Toggle config flags dynamically (e.g. the lid-close "disable internal display"
+# flag written by omarchy-hyprland-monitor-internal). Without this the lid
+# handler's disable never applies and the laptop workspace stays stranded.
+source = ~/.local/state/omarchy/toggles/hypr/*.conf
+
 # Add any other personal Hyprland configuration below
 # windowrule = workspace 5, match:class qemu

hypr/monitors.conf

@@ -2,22 +2,26 @@
 # List current monitors and resolutions possible: hyprctl monitors
 # Format: monitor = [port], resolution, position, scale
 
-# Optimized for retina-class 2x displays, like 13" 2.8K, 27" 5K, 32" 6K.
-env = GDK_SCALE,2
-monitor=,preferred,auto,auto,vrr,1
+# --- Dual external monitor setup (laptop lid closed) ---
+# Layout, left -> right:   [ 1: C24 / DP-1 ]   [ 2: F24 / HDMI-A-1 ]
+# eDP-1 sits to the right of the externals and Hyprland automatically
+# disables it when the lid is closed (since an external is connected).
 
-# Good compromise for 27" or 32" 4K monitors (but fractional!)
-# env = GDK_SCALE,1.75
-# monitor=,preferred,auto,1.6
+# Monitor 1 - C24 curved, DisplayPort via DP->HDMI adapter.
+# NOTE: the DP2HDMI adapter caps this panel at 1920x1080@60 (no 75Hz mode).
+monitor = DP-1, 1920x1080@60, 0x0, 1
 
-# Straight 1x setup for low-resolution displays like 1080p or 1440p
-# Or for ultrawide monitors like 34" 3440x1440 or 49" 5120x1440
-# env = GDK_SCALE,1
-# monitor=,preferred,auto,1
+# Monitor 2 - Sceptre F24, HDMI, native 75Hz.
+monitor = HDMI-A-1, 1920x1080@75, 1920x0, 1
 
-# Portrait/rotated secondary monitor (transform: 1 = 90°, 3 = 270°)
-# monitor = DP-2, preferred, auto, 1, transform, 1
+# Laptop panel - only mode is 1920x1200@60. Parked right of the externals;
+# auto-off on lid close so no windows get stranded on a closed screen.
+monitor = eDP-1, 1920x1200@60, 3840x0, 1.5
 
-# Example for Framework 13 w/ 6K XDR Apple display
-# monitor = DP-5, 6016x3384@60, auto, 2
-# monitor = eDP-1, 2880x1920@120, auto, 2
+# Catch-all fallback for any other/unknown display.
+monitor = , preferred, auto, 1
+
+# GDK_SCALE forced integer scaling is intentionally disabled: the external
+# monitors run at 1x, so a global 2x would blow up GTK apps on them. The
+# per-monitor scale factors above are enough.
+# env = GDK_SCALE,2

install.sh

@@ -130,12 +130,20 @@ check_status=0
 
 check_file "$SCRIPT_DIR/waybar/config.jsonc" "$HOME_DIR/.config/waybar/config.jsonc" "waybar/config.jsonc" || check_status=1
 check_file "$SCRIPT_DIR/hypr/hyprland.conf" "$HOME_DIR/.config/hypr/hyprland.conf" "hypr/hyprland.conf" || check_status=1
+check_file "$SCRIPT_DIR/hypr/monitors.conf" "$HOME_DIR/.config/hypr/monitors.conf" "hypr/monitors.conf" || check_status=1
 check_file "$SCRIPT_DIR/hypr/autostart.conf" "$HOME_DIR/.config/hypr/autostart.conf" "hypr/autostart.conf" || check_status=1
 check_file "$SCRIPT_DIR/hypr/looknfeel.conf" "$HOME_DIR/.config/hypr/looknfeel.conf" "hypr/looknfeel.conf" || check_status=1
+check_file "$SCRIPT_DIR/hypr/bindings.conf" "$HOME_DIR/.config/hypr/bindings.conf" "hypr/bindings.conf" || check_status=1
+check_file "$SCRIPT_DIR/hypr/hypridle.conf" "$HOME_DIR/.config/hypr/hypridle.conf" "hypr/hypridle.conf" || check_status=1
 check_file "$SCRIPT_DIR/omarchy/hooks/theme-set" "$HOME_DIR/.config/omarchy/hooks/theme-set" "omarchy/hooks/theme-set" || check_status=1
 check_file "$SCRIPT_DIR/ags/app.ts" "$HOME_DIR/.config/ags/app.ts" "ags/app.ts" || check_status=1
 check_file "$SCRIPT_DIR/ags/style.css" "$HOME_DIR/.config/ags/style.css" "ags/style.css" || check_status=1
+check_file "$SCRIPT_DIR/ags/lib/utils.ts" "$HOME_DIR/.config/ags/lib/utils.ts" "ags/lib/utils.ts" || check_status=1
 check_file "$SCRIPT_DIR/ags/widget/Media.tsx" "$HOME_DIR/.config/ags/widget/Media.tsx" "ags/widget/Media.tsx" || check_status=1
+check_file "$SCRIPT_DIR/ags/widget/Notifications.tsx" "$HOME_DIR/.config/ags/widget/Notifications.tsx" "ags/widget/Notifications.tsx" || check_status=1
+check_file "$SCRIPT_DIR/ags/widget/QuickSettings.tsx" "$HOME_DIR/.config/ags/widget/QuickSettings.tsx" "ags/widget/QuickSettings.tsx" || check_status=1
+check_file "$SCRIPT_DIR/ags/widget/SysMonitor.tsx" "$HOME_DIR/.config/ags/widget/SysMonitor.tsx" "ags/widget/SysMonitor.tsx" || check_status=1
+check_file "$SCRIPT_DIR/ags/widget/WallPicker.tsx" "$HOME_DIR/.config/ags/widget/WallPicker.tsx" "ags/widget/WallPicker.tsx" || check_status=1
 check_file "$SCRIPT_DIR/waybar/style.css" "$HOME_DIR/.config/waybar/style.css" "waybar/style.css" || check_status=1
 check_file "$SCRIPT_DIR/elephant/menus/blob_background_selector.lua" "$HOME_DIR/.config/elephant/menus/blob_background_selector.lua" "elephant/menus/blob_background_selector.lua" || check_status=1
 check_file "$SCRIPT_DIR/branding/about.txt" "$HOME_DIR/.config/omarchy/branding/about.txt" "branding/about.txt" || check_status=1
@@ -235,6 +243,33 @@ add_system_path() {
 
 add_system_path
 
+# Keep the laptop awake with the lid closed while docked / on AC, so the two
+# external monitors stay usable. Paired with the lid-switch binds in
+# hypr/bindings.conf, which disable eDP-1 on close so no workspace is stranded.
+configure_lid_switch() {
+    local dropin="/etc/systemd/logind.conf.d/10-lid.conf"
+    local content="[Login]
+HandleLidSwitch=suspend
+HandleLidSwitchExternalPower=ignore
+HandleLidSwitchDocked=ignore"
+
+    if [ -f "$dropin" ] && [ "$(cat "$dropin" 2>/dev/null)" = "$content" ]; then
+        echo "Lid switch behavior already configured"
+        return
+    fi
+
+    if sudo mkdir -p "$(dirname "$dropin")" 2>/dev/null \
+        && printf '%s\n' "$content" | sudo tee "$dropin" > /dev/null 2>&1; then
+        sudo chmod 644 "$dropin"
+        sudo systemctl restart systemd-logind 2>/dev/null || true
+        echo "Configured lid switch (suspend on battery, ignore when docked/on AC)"
+    else
+        echo "Skipped lid switch config (no sudo available)"
+    fi
+}
+
+configure_lid_switch
+
 add_path_to_shell() {
     local shell_rc="$1"
     local path_line='export PATH="$HOME/scripts:$HOME/.local/bin:$PATH"'
@@ -273,6 +308,23 @@ else
     echo "Warning: ags not found. Please start ags manually."
 fi
 
+echo ""
+echo "=== Reloading Hyprland ==="
+if command -v hyprctl &> /dev/null; then
+    hyprctl reload || true
+else
+    echo "Warning: hyprctl not found. Please reload Hyprland manually."
+fi
+
+echo ""
+echo "=== Restarting hypridle ==="
+if command -v hypridle &> /dev/null; then
+    pkill -x hypridle 2>/dev/null || true
+    nohup hypridle >/dev/null 2>&1 &
+else
+    echo "Warning: hypridle not found. Please restart hypridle manually."
+fi
+
 echo ""
 echo "=== Installation Complete ==="
 echo "Scripts are in: $HOME_DIR/scripts/"

revert.sh

@@ -69,6 +69,24 @@ if [ -n "$zen_profile" ]; then
     revert_dir "$zen_profile/chrome" "Zen Browser config"
 fi
 
+# Undo the lid-switch override installed by install.sh (restores default
+# logind behavior: suspend on lid close regardless of power/dock state).
+remove_lid_switch() {
+    local dropin="/etc/systemd/logind.conf.d/10-lid.conf"
+    if [ ! -f "$dropin" ]; then
+        echo "[SKIP] No lid switch config to remove"
+        return
+    fi
+    if sudo rm -f "$dropin" 2>/dev/null; then
+        sudo systemctl restart systemd-logind 2>/dev/null || true
+        echo "✓ Removed lid switch config ($dropin)"
+    else
+        echo "[SKIP] Could not remove $dropin (no sudo available)"
+    fi
+}
+
+remove_lid_switch
+
 echo ""
 echo "=== Restarting Waybar ==="
 if command -v omarchy-restart-waybar &> /dev/null; then
@@ -86,5 +104,22 @@ else
     echo "Warning: ags not found. Please start ags manually."
 fi
 
+echo ""
+echo "=== Reloading Hyprland ==="
+if command -v hyprctl &> /dev/null; then
+    hyprctl reload || true
+else
+    echo "Warning: hyprctl not found. Please reload Hyprland manually."
+fi
+
+echo ""
+echo "=== Restarting hypridle ==="
+if command -v hypridle &> /dev/null; then
+    pkill -x hypridle 2>/dev/null || true
+    nohup hypridle >/dev/null 2>&1 &
+else
+    echo "Warning: hypridle not found. Please restart hypridle manually."
+fi
+
 echo ""
 echo "=== Revert Complete ==="