Files
simulation/config/ardupilot_gps_denied.parm
2026-02-09 06:12:38 +00:00

94 lines
2.4 KiB
Plaintext

# ArduPilot Parameters for Simulation
# Uses GPS from Gazebo for position estimation
# ====================
# GPS Configuration
# ====================
# Enable GPS (Gazebo provides simulated GPS)
GPS_TYPE 1 # Auto-detect
GPS_TYPE2 0
# ====================
# Geofence Settings
# ====================
# Disable geofence for simulation (avoids position requirement issues)
FENCE_ENABLE 0
FENCE_TYPE 3 # Alt + Circle
FENCE_ACTION 2 # Land on breach
FENCE_ALT_MAX 50 # Maximum altitude (meters)
FENCE_RADIUS 100 # Circular fence radius (meters)
FENCE_MARGIN 2 # Margin inside fence for warning
# ====================
# EKF Configuration
# ====================
# Use EKF3 with GPS
AHRS_EKF_TYPE 3
EK3_ENABLE 1
EK2_ENABLE 0
# EKF3 Source Configuration - Use GPS
EK3_SRC1_POSXY 3 # GPS for XY position
EK3_SRC1_POSZ 1 # Barometer for Z position
EK3_SRC1_VELXY 3 # GPS for XY velocity
EK3_SRC1_VELZ 0 # None for Z velocity
EK3_SRC1_YAW 1 # Compass for yaw
# EKF3 Position Innovation Gate
EK3_POS_I_GATE 300 # Larger gate
# ====================
# Vision Position Input
# ====================
# Disable vision odometry (not using for simulation)
VISO_TYPE 0 # Disabled
VISO_POS_X 0.0
VISO_POS_Y 0.0
VISO_POS_Z 0.0
VISO_ORIENT 0
VISO_DELAY_MS 50
# ====================
# Optical Flow
# ====================
# Disable optical flow (using GPS instead)
FLOW_TYPE 0 # Disabled
# ====================
# Rangefinder
# ====================
# Disable rangefinder (using barometer + GPS)
RNGFND1_TYPE 0 # Disabled
# ====================
# Failsafe Settings
# ====================
FS_EKF_ACTION 1 # Land on EKF failsafe
FS_EKF_THRESH 0.8 # EKF failsafe threshold
FS_VIBE_ENABLE 0 # Disable vibration failsafe
FS_GPS_ENABLE 0 # Disable GPS failsafe for simulation
# ====================
# Flight Modes
# ====================
FLTMODE1 0 # Stabilize
FLTMODE2 2 # Alt Hold
FLTMODE3 5 # Loiter
FLTMODE4 4 # Guided
FLTMODE5 6 # RTL
FLTMODE6 9 # Land
# ====================
# Arming Checks
# ====================
# Disable arming checks for simulation testing
ARMING_CHECK 0 # Disable all checks (for sim only)
# ====================
# Logging
# ====================
LOG_BITMASK 176126 # Log all relevant data
LOG_DISARMED 0 # Don't log when disarmed